CLASS: INTREPID

The Intrepid design was fielded partly to correct Starfleets lack of more all-purpose starships. The design requirement, issued in 2358, called for a vessel in the 360 metre range with a volume some 15% that of a Galaxy class. Although the limited size meant that the vessel would have much lower overall capabilities than the Galaxy class, this was to be in some part offset by the use of the latest technology. The ships computer system would be the most advanced model in service; the increased automation this afforded combined with a new generation of sensor equipment would allow the Intrepid class almost 30% of the scanning and analysis capabilities of a Galaxy class starship. A top cruise speed some three times that of the Galaxy would further enhance the vessels exploration capabilities.

The Intrepid's combat role was also somewhat limited by her size; unable to carry large numbers of torpedoes or high power phaser banks, Starfleet settled on a scouting and support mission for the ship. Fitted out with Type VIII phaser arrays and single fire torpedo tubes, the Intrepid would be capable of engaging vessels the size of a Bird of Prey one-on-one. Her high speed and manoeuvrability combined with the advanced sensor system would also make her a perfect platform to conduct long range reconnaissance missions ahead of fleet operations. Within a major fleet battle the Intrepid would also act in support of larger ships, harrying enemy fleet units and drawing fire away from larger Federation ships.

Development of the intrepid class went relatively smoothly in the early and mid stages, but a major problem arose in 2370 with the discovery that the energy emissions of standard warp drives caused considerable cumulative damage to the structure of subspace. Starfleet called for all designs then in progress to be modified to eliminate this effect, and it was decided to use the Intrepid class as a test bed for this technology. After some experimentation it was found that the effect could be avoided by using a warp field with a much elongated Z-axis, combined with complex warp field modulation and the utilization of new materials during the manufacture of warp coils. This has led to the ships saucer section having the forward ellipse now becoming common on Federation designs. The new warp field configuration did lead to a 15% reduction in the speed of the Intrepid class across all flight regimes, bringing the top cruise speed down from Warp 9.99 to Warp 9.975, and the maximum rated speed from Warp 9.992 to Warp 9.985.